New 910 Small Wheel Loader 10932

Description

The Cat® 910 Small Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Features

Maximum Gross Power

110 hp

Operating Weight

18,102 lb

Bucket Capacities

1.3-3.5 m3 (1.7-4.6 yd3)

Rated Net Power - Rated Engine Speed

2,200 r/min

Options:

Share Print Download PDF

Engine
Maximum Gross Power
110 hp
Rated Net Power - Rated Engine Speed
2,200 r/min
Maximum Gross Power - Rated Engine Speed
1,800 r/min
Rated Net Power - SAE J1349
99 hp
Maximum Gross Power - ISO 14396 (metric)
112 hp
Rated Net Power - ISO 9249
98 hp
Maximum Gross Torque - SAE J1995
335 ft·lbf
Maximum Gross Torque - ISO 14396
332 ft·lbf
Maximum Net Torque - SAE J1349
329 ft·lbf
Maximum Net Torque - ISO 9249
327 ft·lbf
Displacement
220 in³
Bore
3.85 in
Stroke
4.72 in
Engine Model
Cat C3.6
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396
110 hp
Weights
Operating Weight
18,102 lb
Buckets
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
Sustainability
Recyclability
95%
Cab
ROPS
ISO 3,471:2,008
FOPS
ISO 3,449:2,005
Note (2)
The declared dynamic operator sound pressure levels per ISO 6,396:2,008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2,000/14/EC (as amended by 2,005/88/EC) is 103 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Service Refill Capacities
Cooling System
5.7 gal (US)
Fuel Tank
43.6 gal (US)
Hydraulic System - Including Tank
25.9 gal (US)
Hydraulic Tank
14.5 gal (US)
Transmission
0.8 gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22,241-1.
Axles - Front Center Differential
2 gal (US)
Axles - Rear Center Differential
2 gal (US)
Engine Crankcase
2.6 gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
Steering
Maximum Working Pressure - Steering Pump
2,683 psi
Steering Articulation Angle - Each Direction
40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2 s
Maximum Flow - Steering Pump
17 gpm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
Hydraulic Cycle Time - Total Cycle Time
12.5 s
Maximum Working Pressure - Implement Pump
3,408 psi
Relief Pressure - Tilt Cylinder
4,931 psi
Hydraulic Cycle Time - Rackback
2.2 s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3,046 psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
Maximum Flow - Implement Pump
32 gpm
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3,046 psi
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gpm
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24 gpm
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3
25 mile/h
Forward and Reverse - Speed Range 2*
12.5 mile/h
Forward and Reverse - Speed Range 1*
6.3 mile/h
Tires
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Size
15.5 R25 L2 XTLA
Other Choices Include
17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Axles
Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (Standard)

Explore the 910 Small Wheel Loader for Sale at Quinn Company

Quinn Company is an authorized 910 Small Wheel Loader dealer in Southern and Central California with a large inventory of these machines. Explore our equipment selection to find the model with the specs you need for your project. Our experts are available to help you choose the right machine for your needs.

Buy a 910 Small Wheel Loader Near You Today

This model is one of the many equipment options Quinn Company has in stock for your heavy equipment needs. Our knowledgeable team will help you find the right model suited for your work and deliver industry-leading support long after the sale. Take advantage of our offers and get the best solution for your business. Get a quote for a 910 Small Wheel Loader machine online or contact our professionals for more information about our equipment.