New 988 GC Wheel Loader 21020 for Sale ᐉ Quinn Company 888

Description

The Cat® 988 GC Wheel Loader helps you move more material at a low cost per hour for a fast return on your investment. This machine offers significant fuel savings and up to 10% lower owning and operating cost than the 988K.

Features

Operating Weight

112,426 lb

Bucket Capacity Range

6.4-7.6 m3 (8.3-10 yd3)

Engine Model

Cat® C15

Rated Speed

2,000 rpm

Options:

Share Print Download PDF

Operating Specifications

Operating Weight

112,426 lb

Bucket Capacity Range

6.4-7.6 m3 (8.3-10 yd3)

Rated Payload - Quarry Face

12.5 ton (US)

Cat Truck Match - High Lift

772/773/775
Engine

Engine Model

Cat® C15

Rated Speed

2,000 rpm

Peak Power Speed

1,600 rpm

Gross Power - SAE J1995:2014

456 hp

Net Power - SAE J1349:2011

448 hp

Bore

5.4 in

Stroke

6.75 in

Displacement

927 in³

Peak Torque (1,200 rpm) - SAE J1995:2014

1,778 lbf·ft

Torque Rise

16%

Note (1)

Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Note (2)

Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.

Note (3)

Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions.
Transmission

Transmission Type

Cat planetary power shift

Forward - 1

5 mile/h

Forward - 2

8 mile/h

Reverse - 1

5 mile/h

Reverse - 2

8 mile/h

Direct Drive - Forward 1

Lock-up disabled

Direct Drive - Forward 2

8 mile/h

Direct Drive - Forward 3

14 mile/h

Direct Drive - Forward 4

24 mile/h

Direct Drive - Reverse 1

Lock-up disabled

Direct Drive - Reverse 2

9 mile/h

Direct Drive - Reverse 3

16 mile/h

Direct Drive - Reverse 4

25.4 mile/h

Note

Travel speeds based on 35/65-R33 tires.
Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit

EH - Load Sense

Lift/Tilt System - Pump

Variable displacement piston

Maximum Flow at 2,165 rpm

159 gpm

Relief Valve Setting - Lift/Tilt

4,598 psi

Cylinders, Double Acting - Lift, Bore and Stroke

190 mm x 1,216 mm (7.5 in x 48 in)

Cylinders, Double Acting - Tilt, Bore and Stroke

170 mm x 722 mm (6.7 in x 28.4 in)

Pilot System

Variable displacement piston

Relief Valve Setting

500 psi
Hydraulic Cycle Times

Rack Back

3.8 s

Raise

7.5 s

Dump

3 s

Lower Float Down

4.6 s

Total Hydraulic Cycle Time - Empty Bucket

18.9 s
Hydraulic System - Steering

Steering System - Circuit

Pilot, load sensing

Steering System - Pump

Piston, variable displacement

Maximum Flow at 2,165 rpm

52 gpm

Relief Valve Setting - Steering

4,000 psi

Total Steering Angle

70°

Steering Cycle Times - High Idle

3 s

Steering Cycle Times - Low Idle

5.2 s
Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1,234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1,430), the system co
Axles

Front

Fixed

Rear

Trunnion

Oscillation Angle

+/-12.5°
Brakes

Brakes

ISO 3,450:2,011
Operator's Cab

ROPS/FOPS

Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3,471:2,008 and ISO 3,449:2,005 Level II standards
Sound Performance - Tier 4 Final / Stage V

Operator Sound Pressure Level (ISO 6396:2008)

73 dB(A)

Machine Sound Power Level (ISO 6395:2008)

113 dB(A)

Operator Sound Pressure Level (ISO 6396:2008)*

72 dB(A)

Machine Sound Power Level (ISO 6395:2008)**

110 dB(A)

Note (1)

* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”

Note (2)

** European Union Directive “2,000/14/EC” as amended by “2,005/88/EC” and UK Noise Regulation 2,001 No. 1,701.

Note (3)

The machine sound power level was measured according to ISO 6,395:2,008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (4)

The operator sound pressure level was measured according to ISO 6,396:2,008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (5)

Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA

Operator Sound Pressure Level (ISO 6396:2008)

74 dB(A)

Machine Sound Power Level (ISO 6395:2008)

113 dB(A)

Operator Sound Pressure Level (ISO 6396:2008)*

73 dB(A)

Machine Sound Power Level (ISO 6395:2008)**

110 dB(A)

Note (1)

* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”

Note (2)

** European Union Directive “2,000/14/EC” as amended by “2,005/88/EC” and UK Noise Regulation 2,001 No. 1,701.

Note (3)

The machine sound power level was measured according to ISO 6,395:2,008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (4)

The operator sound pressure level was measured according to ISO 6,396:2,008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (5)

Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Service Refill Capacities

Fuel Tank

141 gal (US)

Cooling System

27 gal (US)

Engine Crankcase

9 gal (US)

Diesel Exhaust Fluid Tank

5.5 gal (US)

Transmission

20 gal (US)

Differential - Final Drives - Front

49 gal (US)

Differential - Final Drives - Rear

45 gal (US)

Hydraulic System Factory Fill

94 gal (US)

Note

Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: - 20% biodiesel FAME (fatty acid methyl ester) *** - 10
Dimensions (Approximate) - High Lift

Ground to Top of ROPS

13.5 ft

Ground to Top of Exhaust Stacks

13.3 ft

Ground to Top of Hood

10.7 ft

Ground to Fuel Tank Clearance

2.2 ft

Rear Axle - Centerline to Bumper

10.3 ft

Front Axle Centerline to Bucket Tip

16.7 ft

Wheel Base

12.5 ft

Maximum Overall Length

39.5 ft

Ground to Lower Hitch Clearance

1.5 ft

Ground to Center of Front Axle

3.2 ft

Clearance at Maximum Lift (45° Dump)

12 ft

B-Pin Height - Maximum Lift

18.7 ft

Maximum Overall Height - Bucket Raised

25 ft

Reach at Maximum Lift (45° Dump)

7.7 ft

Note

Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.

Standard Equipment
Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Electrical
- Alarm, back-up
- Alternator, single 145 amp
- Batteries, maintenance free
- Converter, 10/15 amp, 24V to 12V
- Lighting system (LED, work lights, access and service platform lighting)
- Starting and charging system, 24V
- Auxiliary jump start receptacle
Operator Environment
- Cab precleaner
- Lights, LED
- AM/FM radio
- Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Cat Vision, rear vision camera system
- Cab, sound suppressed and pressurized, integrated rollover protective structure/falling objects protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12‑volt 5-amp) and power port
- Controls, lift and tilt function
- Heater, defroster
- Horn, electric
- Instrumentation, gauges
  – Coolant temperature
  – Engine hour meter
  – Hydraulic oil temperature
  – Powertrain oil temperature
- Light, cab, dome
- Lunchbox, beverage holders
- Mirrors, rearview (externally mounted)
- Seat, Cat Comfort Cloth, air suspension, six-way adjustable
- Seat belt minder
- Seat belt, retractable, 76 mm (3 in) wide
- Steering and Transmission Integrated Control (STIC^™) system
- UV glass
- Transmission gear indicator
- Wet-Arm wipers/washers (front and rear)
  – Intermittent front and rear wipers
- Lights, directional
- Cat Production Measurement ready
Powertrain
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain screens
- Electro hydraulic parking brake
- Engine, C15 MEUI^™ diesel, turbocharged/aftercooled
- Ground level emergency engine shutdown switch
- Turbine precleaner, engine air intake
- Manual switch and automatic fuel priming
- Torque converter, neutralizer
- Transmission, planetary power shift, 4F/4R electronic control
- Cat Integrated Powered Electronics
- Automatic retarding controls
- Crankcase guard
Additional Equipment
- Automatic bucket lift kickout/positioner
- Base machine price includes a rim allowance
- Hydraulically driven demand fan
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Ecology drains for engine, radiator, hydraulic tank
- Fuel tank, 535 L (141 gal)
- Hoses, Cat XT^™
- Hydraulic, steering and brake filtration/screening system
- Cat Clean Emission Module
- Oil sampling valves
- Premixed 50 percent concentration of extended life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Steering, load sensing
- Toe kicks
- Vandalism protection caplocks
Optional Equipment
Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Powertrain
- High ambient cooling – software
- Starting aid, ether, automatic
- Antifreeze -50°C (-58°F)
Operator Environment
- Cat Production Measurement
- CB radio-ready
- Cat Detect, object detection system
Additional Equipment
- Front and rear roading fenders

Buy a 988 GC Wheel Loader Near You Today

This model is one of the many equipment options Quinn Company has in stock for your heavy equipment needs. Our knowledgeable team will help you find the right model suited for your work and deliver industry-leading support long after the sale. Take advantage of our offers and get the best solution for your business. Get a quote for a 988 GC Wheel Loader machine online or contact our professionals for more information about our equipment.

Available Deals

Choose Cat® Certified Used Today

Wide selection of low-hour, thoroughly inspected, high–quality used Cat® machines backed by a Caterpillar warranty.

View Deal

Refer a Friend, Get a Cat® Cooler

When they buy, you get a free Cat® cooler as a thank-you gift!

View Deal

Related & Similar Products

993

Large Wheel Loaders

993 Large Wheel Loaders

View Product Details

988 GC

Large Wheel Loaders

988 GC Large Wheel Loaders

View Product Details

988 XE

Large Wheel Loaders

988 XE Large Wheel Loaders

View Product Details

986

Large Wheel Loaders

986 Large Wheel Loaders

View Product Details

992

Large Wheel Loaders

992 Large Wheel Loaders

View Product Details

988

Large Wheel Loaders

988 Large Wheel Loaders

View Product Details

990

Large Wheel Loaders

990 Large Wheel Loaders

View Product Details

Cat Large Wheel Loaders - 988 GC For Sale

Description

Features

Operating Specifications

Engine

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - High Lift

Standard Equipment

Optional Equipment

Buy a 988 GC Wheel Loader Near You Today

Available Deals

Choose Cat® Certified Used Today

Refer a Friend, Get a Cat® Cooler